Factory Price X50 General Anesthesia Breathing Machine
Product Description
Product Description
ventilator Specification
Ventilation Modes (standard): VCV, SIMV-V, PCV, SIMV-P, SPONT/PSV, Manual, Standby Ventilation Modes (Optional): PRVC, SIMV-PRVC Wave form Paw-T, Flow-T, V-T, CO2-T (Optional), Pleth(Optional), AG(Optional) Loop P-V, V-F Trend: 24 hours
| Physical | specifications |
| Dimensions and Weight | |
| Frame Size | 1410 × 950 × 650 (H × W × D) |
| Weight | 110kg |
| Top plate | |
| Weight limit | 30kg |
| Size | 580 x 400mm |
| Drawers | |
| Dimension | 200 × 392 × 398 (H×W×D) |
| Side of machine | 370mm |
| Casters | |
| Diameters | 125mm |
| Brakes | 2 front casters with foot brake |
| Screen | |
| Display Type | color active matrix TFT |
| Display Size | 12.1 inches |
| Resolution | 800x600 pixels |
| Brightness | well done |
| Respiratory System | |
| Air bellows | 1500mL |
| Absorption chamber | 1500Ml (capacity of Soda Lime ≥1.3KG) |
| Connection | Suction / ACGO ports:standard OD 22mm, ID 15mm,Tapered connector; Exhalation ports: standard OD 22mm, ID 15mm |
| Tapered connector. Manual breathing port | diameterΦ22cm |
| System leaks | < 40ml/min in any mode |
| System compliance | |
| Adult mode | ≤ 4 mL / cmH2O, |
| pediatric mode | ≤ 3 mL / cmH2O |
| Resistance | Inspiratory < 0.6 kPa; Expiratory < 0.6 kPa |
Ventilator Parameter Ranges
| Tidal volume range | 50~1500 ml (VCV and SIMV-V/ PRVC) |
| Tidal Volume range (Optional) | 20 ~ 1500ml (suggested) |
| Incremental settings | 20~100ml, increments of 5 ml; 100~1500 ml, increments of 10 ml. |
| Pressure (inspired) range | 5~70 cmH2O, increments of 1 cmH2O |
| Pressure (limit) range | 10~70 cmH2O, increments of 1 cmH2O (Alarm settings) |
| Pressure (support) range | 0 to 70 cmH2O, increments of 1cmH2O |
| Rate range | 1~100 bpm, increments of 1 bpm |
| Inspiratory/Expiratory ratio (I:E) range | 9:1~1:99 |
| Inspiratory time | 0.1~10.0 seconds, increments of 0.1 seconds |
| Trigger window | 5~ 90%, increments of 5% (SIMV) |
| Pressure trigger | 0-20 cmH2O, increments of 1cmH2O (SIMV, PSV) |
| Flow trigger | 0.5~20L/min, increments of 0.1 L/min |
Monitoring
| Tidal Volume Inspiration/Expiration | 0~2500 mL |
| MV | 0~60 L/min |
| MVspont | 0~60 L/min |
| Frequency | 0~100 bpm |
| Ratespont | 0~100 bpm |
| I:E | 9:1~1:99 |
| Ppeak | 0~100 cmH2O |
| Pmean | 0~100 cmH2O |
| PEEP | 0~100 cmH2O |
| Pplat | 0~100 cmH2O |
| Pmin | -20~100 cmH2O |
| O2% | 15~100% |
| Compliance | 0~300 mL/cmH2O |
| Resistance | 0~600 cmH2O/(L/s) |
| EtCO2 (Optional) | 0~13.3 % |
| FiCO2 (Optional) | 0~13.3 % |
| Anesthetic agent | PHASEIN gas module for anesthetic agent |
| Fresh Gas | O2:0~10 LPM; N2O:0~12 LPM; |
| Air | 0~15 LPM; |
| Total flow | 0~37 LPM |
Alarm
| Upper limit | 30~2000 mL |
| Lower limit | OFF, 20~1500 mL |
| MV | |
| Upper limit | 1~99 L |
| Lower limit | 0~98 L |
| O2% (Optional) | |
| Upper limit | 22~100%,OFF |
| Lower limit | 20~99% |
| Airway Pressure | |
| Upper limit | 10~99 cmH2O |
| Lower limit | 1~98 cmH2O |
| Frequency | |
| Upper limit | 1~100 bpm |
| Lower limit | 0~99 bpm |
| EtCO2 (Optional) | |
| Upper limit | 0.1~13.3 % ; |
| Lower limit | 0~13.2 %; |
| FiCO2 (Optional) | |
| Upper limit | 0.1~13.3 % |
| Pressure high | Airway pressure beyond |
| (PEEP+15)cm | |
| H2O, continue sly(15+1)s | |
| Apnea | 10~60 s, Increase: 1s |
| O2 supply down | < 0.28 MPa |
| Mains failure | Automatic switch battery |
| Battery low | < 10 min |
| Battery discharged | < 5 min |
| Mute | ≤120 s |
| Pressure low | < -10cmH2O |
| FiO2 <18% | <18 Vol.% |
Power Specifications
| Parameter | Specification |
| External AC power | |
| Input Voltage | 100 - 240V |
| Input Frequency | 50/60Hz |
| Input Power | <150 VA |
| Internal Battery | |
| Battery Type | Nimh batteries |
| Rated battery voltage | 12VDC |
| Battery capacity | 4200mAh |
| Shutdown Delay | Less than 10min (using a new fully charged battery, low battery alert since the first post) |
| Shortest supply time | 90min |
| Charging time | 4 hours |
Work Environment
| Temperature | 10 ~ 40 ºC |
| Humidity | 5 ~ 95%, non-condensing |
| Environmental pressures | 70 ~ 106 kPa |
| Storage environment | |
| Temperature | -20 ~ 55 ºC |
| Humidity | 10 ~ 95%, non-condensing |
| Environmental pressures | 50 ~ 106 kPa |
Related Product
Company Information
Our Services
Packaging & Shipping
Product Categories : anesthesia machine
Premium Related Products
Other Products
Hot Products
Detacheable hand switch two position pre and exposex ray thales toshiba image intensifier price replacementx ray radiology table with cassette trayportable dental x ray machine for tooth radiographyDR MonitorCCD Canera Image Signal Processing System630mA Diagnostic X-ray Machineradiology vertical bucky stand for chest radiography checkupx ray collimator for portable x ray mobile x ray machineFoot Switch for X-ray Machinemedical high voltage cable with 3 pin 75kvdc 90kvdc for x ray machinex ray exposure hand switch for portable mobile radiology diagnostic x ray machinevp 33312 vp 33314 high voltage power supply for toshiba 5804 5761 5764 5830 image intensifierthales thomson 7195 7195b high voltage power supply for th9428 th9438 image intensifier23cm triple mode x-ray image intensifierthales 9428 toshiba 5804 x ray image intensifier repalcement